The Stubby Right
Angle XLR F to TA 3 F Cable Configured for Lectrosonices 401 and 411 Receiver Out to Sound Devices 633 and 664 Mixer Line Inputs.
This cable makes for a very neat package when making up a bag with
a mixer, wireless mics, etc. Our color coded caps can easily be seen from the
rear of the connector as well as from the sides, making identification fast and
easy. Caps are permanently installed when the cable is manufactured.
This cable is made specifically to exit from
Lectrosonics UCR 401 or UCR 411 receivers to a Sound Devices
664 or 633 field recorder. The Female XLR end (at the Lectrosonics
receiver) has a cable exit at 9:00. The female TA end (at the Sound
Devices mixer) has a cable exit at 1:30. These exit points allow the
cable to lie nicely and not interfere with each other, other cables, or
The cable used is Belden 1804 black and each
complete cable comes in one standard length of 18”, a length that we believe
will accommodate most options in your audio bag very well.
This cable will work for many other mixer and equipment combinations.
Check to see if this cable exit orientation and length will work in your
Color options for caps are as follows and may be selected
from this page:
Black, Red, Orange, Yellow, Green,
Blue, Violet, White, Hot Pink