TXPH
A small pocket UHF transmitter that has been specially
designed for universal wireless use in all segments of field production sound.
The TXPH offers selectable 100 mW or 50 mW RF output power and up to 40 MHz
switching bandwidth. Great for use on talent with Lavalier mics and for so
called “camera hops” when sending mixer outs wireless to cameras.
Menu
The intuitive Menu uses a blue Organic Light Emitting Diode
(OLED) display which is extremely clear yet consumes very little power. All
parameters are set by scrolling the wheel on the top of each unit to the left
or right and pressing the wheel down to set the desired value.
Mic Input
The mic input is via a durable Binder™ 5-pin locking connector and provides
powering for most electret lavalier microphones and also accepts Line Level
input sources via our accessory cables. Binder™ is a top quality audio
connector brand manufactured in Germany
Powering
Powered by a single 1.5V AA type battery which provides up to 4-6 hours
continuous use depending on battery type, NiMH type is recommended. External
6-18V DC is supplied via the Binder 5-pin connector when using input cables.
Features:
·
up to 40 MHz Switching bandwidth in 25 kHz steps
·
512 - 572 MHz and 614 - 694 MHz operating ranges
- via 4 frequency blocks
·
Compatible with En2 DX, DX2 and CX2
receivers
·
Selectable output power, 100 mW or 50 mW
·
Menu system driven by OLED display and
3-position navigation wheel
·
Powered by Single AA or 6-18V External DC (120mA
@ 12V)
·
5-pin Binder™ locking connector for Lavaliers
and input cables w/ External DC
·
Selectable Low Cut Filter at 80 Hz, 120 Hz and
OFF
·
32 factory pre-set frequencies
·
32 user selected frequencies can be stored
·
Dimensions: 63 x 82 x 20 mm
·
Available without microphone or with select
Voice Technologies™ Lavaliers
·
Made in the UK
Available Options: |
Frequency Range |
|
|
|