DX
The DX is the world’s smallest battery powered True Diversity UHF wireless
receiver. Designed for universal use in all segments of field production sound
offering crystal clear sound, stellar True Diversity RF range, spectrum
analyzer table scanning and up to 40 MHz switching bandwidth.
Menu
The Menu uses a blue Organic Light Emitting Diode (OLED)
display which is extremely clear yet consumes very little power. All parameters
set by scrolling the wheel on the top of each unit to the left or right and
pressing the wheel down to set the desired value.
Output
The receiver output and External DC are via a durable Binder™ 7-pin locking
connector. We offer a selection of cables to balanced XLR with DC connections
for use with popular battery distribution systems. Binder™ is a top quality
audio connector brand manufactured in Germany
Powering
Powered by a single 1.5V AA type battery which provides up to 3 hours
continuous use. External 6-18V DC is connected via the Binder 7-pin connector.
Features:
·
up to 40 MHz Switching bandwidth in 25 kHz steps
·
512 - 572 MHz and 614 - 694 MHz operating ranges
- via 4 frequency blocks
·
Compatible with En2 TXPH and miniTX
transmitters
·
True Diversity
·
Scan for open frequency or for Transmitter
·
Table Scan with Spectrum Analyzer type display
in 200kHz steps
·
Menu system driven by OLED display and
3-position navigation wheel
·
Output: adjustable Line Level output or
Headphone driver with attenuator
·
Use as bullet-proof Diversity IFB receiver in
Headphone mode (requires 3.5mm receptacle cable adaptor)
·
7-pin Binder™ locking connector for output
cables w/ or w/out External DC
·
Powered by Single AA or 6-18V External DC via
7-pin Binder™, 120mA @ 12V
·
32 factory preset frequencies available
·
32 user selected frequencies in 25 kHz steps can
be stored
·
Made in the UK
What is ‘true diversity’?
Most manufacturers offer ‘diversity receivers’ with two antennae
connected to only a single receiver. Signal switching
takes place between the antennae (at rf level) which means there is often
an audible ‘click’ on the recorded sound as
the signal being delivered to the receiver is momentarily interrupted
during switching. With the true diversity DX,
that problem doesn’t happen since switching takes place between the two
receivers at the audio frequency level with
no interruption of signal.
Available Options: |
Frequency Range |
|
|
|